Fire Department Connections

Gated "Y" Leader Line Siamese with ball valves built into body so that either lead can be used independently. Rocker lug female swivel inlet 2 1/2" NST, male outlets 1 1/2". Body painted red with polished chrome trim. NOTE: Not recommended for charged preconnected hose lines.

DESCRIPTION	1	2	3+	SPECS	PRODUCT NUMBER
Gated Wye Connection, Outlets NST	318.65	309.09	299.82		611
Gated Wye Connection, Outlets NPSH	322.47	312.80	303.41		611NPSH

Angle Hose Valve made of cast brass for use with hose storage devices and hydrants. Has a 300lb. rating and is U.L. Listed and FM Approved.

DESCRIPTION	1-2	3-4	5+	SPECS	PRODUCT NUMBER
1 1/2" F x 1 1/2" F Angle Hose Valve	65.96	63.98	62.06		411
1 1/2" F x 1 1/2" F Angle Hose Valve	41.99	40.49	38.99	-------	B411
2 1/2" F x 2 1/2" F Angle Hose Valve	111.03	107.70	104.47	-------	412
1 1/2" F x 1 1/2" F Angle Hose Valve	66.11	64.13	62.20		413
1 1/2" F x 1 1/2" F Angle Hose Valve	41.99	40.49	38.99		B413
2 1/2" F x 2 1/2"M Angle Hose Valve	111.01	107.68	104.45		414
2 1/2" F x 2 1/2" M Angle Hose Valve	70.49	68.99	67.49	-------	B414
1 1/2" F x 1 1/2" M Angle Hose Valve	66.11	64.13	62.20		415

Pressure Reducing Angle Valve made of cast brass can be adjusted to restrict pressures up to 175lbs. Locking pin device restricts full opening of valve by untrained personnel. Pin may be removed by fire personnel to allow full open valve. U.L. Listed.

Gate Valve made of cast brass for use on standpipes, fire pumps or hydrants. Has a straightway pattern, non rising stem and is rated at 300lbs. U.L. Listed and FM Approved.

DESCRIPTION	1-2	3-4	5+	SPECS	PRODUCT NUMBER
2 1/2" Gate Valve w/ Cap and Chain	230.59	223.68	216.97		433
2 1/2" Gate Valve w/ Cap and Chain	148.49	145.49	142.49	-------	B433
3" x 2 1/2" Gate Valve w/ Cap and Chain	270.61	262.49	254.61	-------	434

Single Hydrant Gate Valve made of cast brass for use on standpipes, fire pumps or hydrants. Has a straightway pattern, non rising stem and is rated at 300lbs. U.L. Listed and FM Approved.

The Utool UNIVERSAL VALVE TOOL from Crescent is very versatile - fits a wide variety of valve handwheels, 3/4" to 2" drum plugs and 3/8" to 1/2" square drive sockets. Beveled cut-outs on prongs provide better grip on valve hand wheels. It can also double as a light weight pry bar.

Replacement Parts For Hose Valves. The red colored handwheels are for Giacomini valves and silver handwheels for Powhatan.

DESCRIPTION	1-2	3-4	5+	SPECS	PRODUCT NUMBER
Handwheel for Powhatan 1 1/2" Valve	12.75	11.99	11.25		PHW15
Handwheel Nut for Powhatan1 1/2" Valve	1.73	1.65	1.58	-------	PHWN15
Handwheel for Giacomini 1 1/2" Valve1	21.55	20.91	20.28		GHW15
Handwheel for Powhatan 2 1/2" Valve	15.00	14.33	13.49		PHW25
Handwheel Nut for Powhatan 2 1/2" Valve	1.80	1.73	1.65	-------	PHWN25
Handwheel for Giacomini 2 1/2" Valve	25.35	24.59	23.85		GHW25
Handwheel Nut for Giacomini Valves	2.866	2.77	2.69	-------	GHWN
Rubber Seal for 1 1/2" Giacomini Angle Valve	9.32	8.07	7.83	-------	GSRS15
Rubber Seal for Powhatan 1 1/2" Angle Valve	4.88	4.58	4.28	-------	PSRS15
Rubbber Seal for Powhatan 2 1/2" Angle Valve	10.34	9.89	9.44	-------	PSRS25