Fire Hoses
![](NST75.jpg)
Rack and Reel Fire Hose
is fully lined and FM Labeled.
Has an acceptance test pressure of 500 PSI and a service test of 250 PSI. Each
section comes already folded for ease of installation on pin racks. NOTE: This
inexpensive lightweight hose is designed for use as emergency fire hose only!
It should never be used for wash down or any other purpose. U.L. Labeled rack
and reel fire hose is available for an additional fee.
DESCRIPTION |
1-2 |
3-4 |
5+ |
SPECS |
PRODUCT
NUMBER |
50' x 1 1/2" NST
Rack and Reel Fire Hose (Brass Coupled) |
91.81 |
89.06 |
86.38 |
![](button.gif) |
50NST |
50' x 1 1/2"
NPSH Rack and Reel Fire Hose (Brass Coupled) |
91.81 |
89.06 |
86.38 |
![](button.gif) |
50NPSH |
75' x 1 1/2" NST
Rack and Reel Fire Hose (Brass Cpld) |
120.49 |
116.88 |
113.37 |
![](button.gif) |
75NST |
75' x 1 1/2"
NPSH Rack and Reel Fire Hose (Brass Coupled) |
120.49 |
116.88 |
113.37 |
![](button.gif) |
75NPSH |
100' x 1 1/2"
NST Rack and Reel Fire Hose (Brass Coupled) |
151.16 |
146.63 |
142.23 |
![](button.gif) |
100NST |
100' x 1 1/2"
NPSH Rack and Reel Fire Hose (Brass Coupled) |
151.16 |
146.63 |
142.23 |
![](button.gif) |
100NPSH |
![](NSTDJ50.jpg)
Single Jacket Fire Hose
has a burst pressure of 750 PSI,
an acceptance test pressure of 500 PSI, a service test of 250 PSI and is FM
Labeled. Made of 100% polyester, rubber lined material for strength and
flexibility. Recommended for industrial fire protection.
![](NSTSJ50UL.jpg)
U.L. Labeled Single Jacket Fire
Hose
has a burst pressure of 750 PSI, an acceptance
test pressure of 500 PSI and a service test of 250 PSI. Made of 100% polyester,
rubber lined material for strength and flexibility. Recommended for industrial
fire protection.
DESCRIPTION |
1-2 |
3-4 |
5+ |
SPECS |
PRODUCT
NUMBER |
50' x 1 1/2" UL SJ
Fire Hose (Brass Cpld) |
145.86 |
141.49 |
137.24 |
![](button.gif) |
SJ50ULNST |
75' x 1 1/2" UL SJ
Fire Hose (Brass Cpld)
|
201.50 |
195.46 |
189.60 |
![](button.gif) |
SJ75ULNST |
100' x 1 1/2" UL SJ Fire Hose (Brass Cpld)
|
258.84 |
251.08 |
243.55 |
![](button.gif) |
SJ100ULNST |
50' x 2 1/2" UL SJ Fire Hose
(Brass Cpld)
|
240.46 |
233.24 |
226.25 |
![](button.gif) |
SJ2550ULNST |
![](NSTDJ50.jpg)
Double Jacket Fire Hose
has a burst pressure of 1200 PSI,
an acceptance test pressure of 800 PSI, a service test of 400 PSI, meets NFPA
1962 and is FM Labeled. Made of 100% polyester, rubber lined material for
strength and flexibility. Recommended for industrial fire protection.
DESCRIPTION |
1-2 |
3-4 |
5+ |
SPECS |
PRODUCT
NUMBER |
50' x 1 1/2" DJ Fire Hose (Brass Cpld.)
|
171.57 |
166.42 |
161.43 |
![](button.gif) |
DJ50NST |
50' x 1 1/2" DJ
Fire Hose (Brass Cpld.)
|
171.57 |
166.42 |
161.43 |
![](button.gif) |
DJ50NPSH |
50' x 1 1/2" DJ Fire Hose (Alum. Cpld.)
|
171.70 |
166.55 |
161.56 |
![](button.gif) |
DJ50ANST |
00' x 1 1/2" DJ Fire Hose (Brass Cpld.)
|
321.35 |
311.71 |
302.35 |
![](button.gif) |
DJ100NST |
100' x 1 1/2" DJ Fire Hose
(Alum. Cpld.)
|
325.07 |
315.32 |
305.86 |
![](button.gif) |
DJ100ANST |
50' x 2 1/2" DJ Fire Hose
(Brass Cpld.)
|
285.48 |
276.91 |
268.60 |
![](button.gif) |
DJ2550NST |
50' x 2 1/2" DJ Fire Hose
(Alum. Cpld.)
|
286.88 |
278.27 |
269.92 |
![](button.gif) |
DJ2550ANST |
![](NSTDJ50YHA.jpg)
Yellow Polymer Impregnated Fire
Hose
has the same specifications as our standard
double jacket hose except that the outside jacket is independently and
completely impregnated with abrasion resistant, water repellent polymer.
Available in aluminum couplings only.
DESCRIPTION |
1-2 |
3-4 |
5+ |
SPECS |
PRODUCT
NUMBER |
50' x 1 1/2"
Yellow Hypalon Impregnated DJ Fire Hose
|
193.57 |
187.76 |
182.13 |
![](button.gif) |
DJ50YHANST |
50' x 2 1/2"
Yellow Hypalon Impregnated DJ Fire Hose
|
313.65 |
304.24 |
295.11 |
![](button.gif) |
DJ2550YHANST |
![](NSTRCH50A.jpg)
Rubber Covered Fire Hose
has a burst pressure of 800 PSI,
an acceptance test pressure of 500 PSI, a service test of 250 PSI and is FM
Labeled. Abrasion and heat resistant nitrite synthetic one-piece cover and
liner. Impervious to water, oil, gas and most chemicals. Lightweight and
virtually kink resistant for ease of handling. No drying required! Tested to
and coupled to NFPA 1961 standard and comes FM Labeled. Available in aluminum
couplings only.
DESCRIPTION |
1-2 |
3-4 |
5+ |
SPECS |
PRODUCT
NUMBER |
50' x 1 1/2"
Rubber Covered Fire Hose (Alum. Cpld.)
|
154.49 |
151.49 |
148.49 |
![](button.gif) |
RCH50ANST |
50' x 21/2" Rubber
Covered Fire Hose (Alum. Cpld.)
|
229.49 |
226.49 |
223.49 |
![](button.gif) |
RCH2550ANST |
|