FireDot.com

Smoke Detectors


914E
Battery Operated Ionization Smoke Detector 

FEATURES
- Compact size offers maximum protection with oversize trim plate to cover marks left by standard size detectors.
- More visually appealing than larger, bulkier units.
- Flashing red light indicates alarm is receiving power.
- Ionization chamber responds fast to low-smoke flaming fires.
- Unit will sound a warning chirp when battery is low.
- Test button check horn, battery and alarm circuitry
- Loud piercing, pulsating horn
- Special twist-off mounting bracket for fast installation and safe battery replacement.
- 9 volt battery included.
- UL listed

PRINCIPLES OF OPERATION
Detects smoke by Ionization
RATINGS
Approvals: Meets UL 217, NFPA , CSFM , FHA, HUD. Approved for use in recreational vehicles.
Auditory: Loudness: 85 dB minimum @ 10 ft.
Frequency: 3000 - 3003 Hz
Duration: Continuous while smoke is present
Battery: Nominal Voltage: 9 V
Battery Replacement: Note that the alkaline battery can be replaced with a lithium battery for longer life.
Electrical: Solid State Circuitry: Complementary MOS integrated circuit provides maximum stability and minimum power consumption.
Low Battery Indicator: Sounds a chirp at 30 - 40 second intervals for a minimum of 7 days, to signal low battery
Sensitivity: Preset to nominal 1% obscuration
Temperature: Operating: 40° F - 100° F
Miscellaneous: Humidity: 5 - 95% relative humidity
SIZE
Diameter: Body: 3 7/8 "
Plate: 4 7/8 "
Height: 1 1/2 "
 
                                                             Copyright © Gallagher Fire
All rights reserved
Last modified: October, 2010