|
FireDot.com |
Smoke Detectors
916LL
Battery Operated Ionization Smoke Detector w/Lithium Battery
FEATURES
- Flashing red light indicates alarm
is receiving power.
- Ionization chamber responds fast to low-smoke flaming fires.
- Unit will sound a warning chirp when battery is low.
- Test button check horn, battery and alarm circuitry by simulating entry of
smoke
- Hush button temporarily silences false
alarms from cooking, fireplaces or cigarettes.
- Loud piercing, pulsating horn
- Special twist-off mounting bracket for fast installation and safe battery
replacement.
- 9 volt battery included.
- UL listed
- 10 year (limited) warranty.
| PRINCIPLES OF OPERATION | |
| Detects smoke by Ionization | |
| RATINGS | |
| Approvals: | Meets UL 217, NFPA , CSFM , FHA, HUD. Approved for use in recreational vehicles. |
| Auditory: | Loudness:
85 dB minimum @ 10
ft. Duration: Continuous while smoke is present |
| Battery: | Nominal
Voltage: 9
V Battery Replacement: Note that the alkaline battery can be replaced with a lithium battery for longer life. |
| Electrical: |
Solid State Circuitry: Complementary
MOS integrated circuit provides maximum stability and minimum power
consumption. Low Battery Indicator: Sounds a chirp at 30 - 40 second intervals to signal low battery. Hush Button: Can be used to silence false alarms. Alarms automatically reset after 7 minutes. In case of dense smoke, the alarm circuitry overrides the hush button to sound the alarm. Please Note: When installing the backup battery, care should be taken to not accidentally press the hush button. Doing so will make the test button inoperable for the 7 minute hush cycle, making the detector appear to malfunction when tested. |
| Sensitivity: | Preset to nominal 1% obscuration |
| Temperature: | Operating: 40° F - 100° F |
| Miscellaneous: | Humidity: 5 - 95% relative humidity |
