Carbon Monoxide Detectors

FEATURES
- Digital readout indicates CO level in parts per million. Updates every 2 1/2 minutes - lets you see if levels change.
- Loud piercing, pulsating horn sounds when a dangerous level of CO is detected.
- Test/Reset button has two functions. It will check sensor and alarm functions, as well as, shut off the alarm. Unit will re-alarm if CO persists.
- Peak level button will display highest recorded level of CO since last reset or unplugged.
- CO specific sensor never needs replacing.
- Unique 8' pull-out transformer/adapter enables the dectector to be used as a direct plug unit, a wall mounted unit or a table top unit.
- 9 volt battery included.
- Never needs recalibration.
- UL listed.
- 5 year (limited) warranty.

APPLICATIONS
Location:	Suitable for direct plug in, wall mounting (keyholes provided), or table top.
INSTRUCTIONS
Installation Instructions:	Notes On Installation: For use in or near sleeping areas. Install at least 15' from heating or cooking appliance and at least 6" from the ceiling.
Maintenance Instructions:	Vacuum the detector once a month with the brush attachement to remove accumulated dust.
PRINCIPLES OF OPERATION
Background:	Air and CO enters into the detector at the bottom vent and circulates through the sensing chamber (metal dioxide sensor), existing through the top vent. Alarm occurs when minimum CO levels are detected. See the 'CO Detector' file in Engineering for detailed inforemation on minimum/maximum CO levels as it relates to the alarm function.
RATINGS
Approvals:	Meets UL 2034, ULC .
Auditory:	Loudness: 85 db minimum @ 10 ft. Frequency: 60 Hz . Duration: Continuous while minimum levels of CO are present.
Battery:	Nominal Voltage: 9V Battery-replacement: Note that the alkaline battery can be replaced with a lithium battery for longer life.
Electrical:	Voltage: 120 VAC. Amperage: 80 amps max. Hush Button: Test/Reset button works as an alarm shut off. It resets the detector and continues to monitor CO levels. Low Battery Indicator: "Lb" message will display which will blink alternately with the CO reading every second and the sounder will chirp every 2 1/2 minutes.
Sensitivity:	Accuracy: Calibrated at a CO concentration of 100 ppm (+/- 25 ppm) in air, at 80° F (+/- 10° F ) and 40% (+/- 3%) relative humidity. Note: Sensor thoroughly conditioned (minimum seven day warmup period), stabilized and non-contaminated.
Temperature:	Operating: 40° F - 100° F
Visual:	Display: Digital LED readout 0 - 999.
SIZE
Length:	6"
Height:	1 7/8 "
Width:	3 3/4 "
Weight:	1