|
FireDot.com |
CORNER PULLEYS
1. Model SBP-1 (P/N 415670)
A corner pulley is used whenever a change in stainless steel cable direction is required. The Model SBP-1 corner pulley is equipped with a set screw fitting for connection to 1/2 in. (1.3 cm) EMT. See Figure 2-14.
2. Model CBP-1 (P/N 423250)
A corner pulley is used whenever a change in stainless cable direction is required. The Model CBP-1 is a grease-tight corner pulley designed for area likely to experience excessive deposit build-up. It is equipped with a compression fitting for connection to 1/2in. (1.3 cm) EMT. See Figure 2-15.
Note: The Model CBP-1 is not a liquid tight seal for penetration of hoods and/or ducts.
3. Model WBP-1 (P/N 550982).
A corner pulley is used whenever a change in stainless cable direction is required. The Model WBP-1 is a weather-proof corner pulley designed for areas likely to be exposed to moisture. It is equipped with female pine threads of connection to 1/2 in. (1.3 cm) rigid conduit. See Figure 2-15a.
