Sprinkle Accessories & Standpipe Equipment

Sprinkler Cage made of red painted steel.

Sprinkler Head Cabinets made of red enamel painted steel will accommodate 1/2" or 3/4" heads. Will hold wrenches also. Two sizes available to meet code requirements. Can be mounted on the wall.

Solid and split Wall Escutcheons. The heavy duty split style has springs for easy centering on the pipe and is ideal for installation over existing sprinkler heads. All are chrome plated with opening for 1/2" pipe sprinkler heads.

Canopy style two piece Escutcheons available with solid or split cups. The split cup style is ideal for installation over existing sprinkler heads. Order one cup and one skirt for each sprinkler head. All are chrome plated with opening for 1/2" pipe sprinkler heads.

Globe Two Piece Recessed Escutcheon is available in white or chrome finish. Fits the model A-1 or A-2 sprinkler heads. These are easy to install and are more attractive. U.L. Listed and FM Approved.

Caddy Fasteners offer a wide variety of clamps and hangers with a number of uses in the sprinkler and restaurant system industries. U.L. Listed, except for p/n CF8 and CF10.

DESCRIPTION	EACH	SPECS	PRODUCT NUMBER
Clip for 1/2" to 3/4" Conduit to 1/8" to 1/4" Flanges	63.00		CF1
Clamp for 1/8" to 5/8" Beam Flanges w/ 1/4" Threaded Rod Support	22.50		CF2
Clamp for 1/8" to 5/8" Beam Flanges w/ 1/2" Conduit Clamp	36.00		CF3
Hammer-on 1/4" Threaded Rod Hanger for 1/8" to 1/4" Beam Flange	52.50		CF4
Hammer-on 1/4" Threaded Rod Hanger for 5/16" - 1/2" Beam Flange	52.50		CF5
Hammer-on 3/8" Threaded Rod Hanger for 1/8" - 1/4" Beam Flange	55.50		CF6
Hammer-on 3/8" Threaded Rod Hanger for 5/16" - 1/2" Beam Flange	55.50		CF7
3/4" Malleable Beam Clamp for 3/8" Threaded Rods	105.00		CF8
1 1/4" Reversible Beam Clamp for 3/8" Threaded Rod	57.00		CF9
3/4" Swivel Beam Clamp for 1/2" Threaded Rod	61.50		CF10

Ceiling Spray Paints to match new or old textured and acoustical ceiling tiles. New White color is bright white for newer installations and Old White color is for ceilings that have yellowed over time. Also covers water stains. Does not effect acoustical properties of tiles. Comes with a special upward spraying nozzle

PipeFit Thread Sealant Paste with Teflon is a premium non-hardening paste formulated as a low cost, high performance thread sealant. PipeFit contains more Teflon by volume than any other similar product. Suitable for most threaded materials including CPVC. Designed to be used in the field as well as high speed threading operations in fabrication shops. Pint size has brush in cap.

Slic-Tite Paste by La-Co heavy duty thread sealing compound with Teflon. Use on metal, PVC, CPVC, and ABS pipe threads. Working pressure is 3000 PSI for gas and 10,000 PSI for liquids. USDA approved for use in federally inspected meat and poultry plants.

Pipe Dope Brush with 6" wood handle and natural fibers. A long time favorite with pipe fitters.

Sprinkler Shut Off (will not fit all models).

Sprinkler Wrenches for Globe sprinklers.

Double Sided Foam Tape for mounting of signs and many other uses. Closed cell cross-linked polyethylene foam is 1/16" thick and 3/4" wide. Synthetic polymer based adhesive is perfect for attaching signs to most smooth and irregular surfaces. Tape comes in 108ft. rolls and is easily cut to desired lengths. Apply when over 50° F on most clean, dry, and oil free surfaces.

Adhesive Backed Magnetic Strip for mounting signs, breaker bars and many other uses. Designed to withstand temperatures from -40° F to 160° F. Durable outdoor adhesive with peel-off liner on weak side of magnet. Half inch wide tape comes in 100ft. rolls and is easily cut wih scissors to desired length.

Fire Sprinkler Line Label with arrow. Fade resistant red ink printed on white self adhesive vinyl. Use to identify sprinkler lines and the direction of flow. Rolls of 100 labels.

DESCRIPTION	1	2	3+	SPECS	PRODUCT NUMBER
Fire Sprinkler Line Label	87.00	85.50	84.00		BL252

The Ashcroft Sprinkler Gauges are designed for use on wet or dry sprinkler systems. The 3 1/2" gauges are FM Approved and Listed by Underwriters' Laboratories. The retarded "air" gauge, SG1 is used on the sprinkler head side of the control valve in a dry system to accurately monitor line air pressure and also have the ability to accept water pressure up to 250 PSI upon system activation. The SG2 is used on the water supply side of the system to indicate available source pressure. Custom gauge faces available with your name and phone number. Contact Sales for information.

Cast Brass Line Tester is ideal for installing the last Sprinkler head on system branch lines or controlling water flow in flushing/testing situations.

Solid Brass Test and Drain Valves, meet all the requirements for inspecting and testing your wet-pipe sprinkler system. A Chrome-plated ball and Teflon seats ensure easy operation and positive shut off.

Bronze Three Way Gauge Valve is used to facilitate the installation of sprinkler system gauges. The 1/4" NPT threaded valve has one inlet and two outlets. This valve allows replacement of the gauge without having to shut off the system water supply. It also allows the AHJ to test the system pressure through the second outlet with an additional gauge (the second outlet is normally plugged at installation).

Globe Valves are made of bronze and have a Teflon seat for improved sealing

Globe Angle Valves are made of cast brass for trim and drain applications. The soft seat design utilizing NBR Nancar N70 material provides for positive sealing up to 200 PSI. Most commonly used in the system drain at the riser, but may also be used on both the alarm valve and shotgun type risers. The 2" size is UL Listed. All valves are female by female with NPT threads.