| |
AR-AFFF FOAM
Universal Ultra AR-AFFF
Foam - February 2002
Section 1 -
Name & Hazard Summary |
Material name: Universal
Ultra AR-AFFF Foam Extinguisher Charge
Product: Synonyms: Alcohol Resistant Aqueous Film Forming Foam |
Section 2 -
Ingredient |
Components -- CAS
NUMBER
Water -- 7732-18-5
(2-Methoxymethylethoxy)Propanol --
34590-94-8
Proprietary mixture of synthetic
detergents Fluoroalkyl Surfactant -- Confidential
Polysaccharide -- 11138-66-2
|
Section 3 - Hazards
Identification |
Potential Health Effects
Inhalation
Not a hazard in normal
industrial use.
Skin Contact
Contact with liquid may cause moderate
irritation or dermatitis due to removal of oils from the skin.
Eye Contact
Product is an eye irritant.
Ingestion
No data avaialable.
Additional Health Effects
Existing eye or skin sensitivity may be
aggravated by exposure.
Carcinogenicity Information
No data available. |
Section 4 - First Aid Measures |
Inhalation
No specific treatment is
necessary since this material is not likely to be hazardous by inhalation.
If exposed to excessive levels of airborne mists, remove to fresh air.
Seek medical attention if effects occur.
Skin Contact
In case of skin contact,
immediately flush skin with copious amounts of water for at least 15
minutes. Launder clothing before re-use. If irritation occurs, obtain
medical attention.
Eye Contact
In case of eye contact,
immediately flush eyes with copious amounts of water for 15-30 minutes.
Retract eyelids often to ensure thorough rinsing. Contact a physician if
irritation persists.
Ingestion
If swallowed, give victim
plenty of milk or water to drink. Do not induce vomiting. Never administer
anything by mouth to an unconscious person. Seek medical attention. |
Section 5 - Fire Fighting
Measures |
Flammable Properties
Flash Point – Not
applicable
Fire and Explosion Hazards
Avoid contact with water
reactive materials, burning metals and electrically energized equipment.
Extinguishing Media
Product is an extinguishing
media. Use media appropriate for surrounding materials.
Special Fire Fighting Instructions
This product will produce
foam when mixed with water. |
Section 6 - Accidental Release
Measures |
Safeguards
(Personnel)
NOTE: Review FIRE FIGHTING
MEASURES and HANDLING (Personnel) sections before proceeding with
clean-up. Use appropriate Personal Protective Equipment during clean-up.
Accidental Release Measures
Stop flow if possible. Use appropriate protective equipment during
clean up. For small volume releases, collect spilled concentrate with
absorbent material; place in approved container. For large volume
releases, contain and collect for use where possible. Flush area with
water until it no longer foams. Exercise caution, surfaces may be
slippery. Prevent discharge of concentrate to waterways. Disposal should
be made in accordance with federal, state and local regulations.
|
Section 7 - Handling and Storage |
Handling (Personnel)
Avoid contact with eyes,
skin or clothing. Avoid ingestion or inhalation. Rinse skin and eyes
thoroughly in case of contact. Review HAZARDS and FIRST AID sections.
Storage
Recommended storage
environment is between 35°F (2°C) and 120°F (49°C). Store product in
original shipping container or tanks designed for product storage. |
Section 8 - Exposure Control/
Personal Protection |
Engineering Controls:
Special ventilation is not required.
Personal Protective Equipment
Respiratory
Recommended exposure limits (OSHA-PEL and ACGIH-TLV) have not been
determined for this material. The need for respiratory protection should
be evaluated by a qualified health specialist.
Protective Clothing
Rubber or PVC gloves recommended.
Eye Protection
Safety glasses, face shield or chemical splash goggles must be worn when
possibility exists for eye contact. Contact lenses should not be worn. Eye
wash facilities are recommended.
Other Hygienic Practices
Use good personal hygiene practices. Wash hands before eating, drinking,
smoking, or using toilet facilities. Promptly remove soiled clothing and
wash thoroughly before re-use.
Exposure Guidelines
Exposure Limits
(2-Methoxymethylethoxy)Propanol (34590-94-8)
PEL(OSHA)
100 ppm, hr. TWA Skin
150 ppm, 15 min. STEL Skin
TLV (ACGIH)
100 ppm, 8 hr. TWA Skin
150 ppm, 15 min. STEL Skin |
Section 9 - Physical &
Chemical Properties |
Physical Data
Boiling Point: Not applicable
Vapor Pressure: Not applicable
Vapor Density: Not applicable
Melting Point: Not applicable
Evaporation Rate: <1 (Butyl
Acetate = 1.0)
Solubility in Water: 100%
pH: 8.5
Specific Gravity: 1.015@ 25°C
Odor: Mild, pleasant
Form: Viscous liquid
Color: Yellow |
Section 10 - Stability and
Reactivity |
Chemical Stability
Stable.
Incompatibility, Materials to Avoid
Avoid use of product on burning metals, electrically-energized equipment
and contact with water reactive materials.
Polymerization
Will not occur. |
Section 11 - Toxicological
Information |
This product has not
been tested as a whole for acute oral and inhalation toxicity, primary eye
irritation, or primary skin irritation. |
Section 12 - Ecological
Information |
Ecotoxicological
Information Aquatic Toxicity
No data avaiable.
Environmental Fate
BOD5 No data available
COD No data available |
Section 13 - Disposal
Considerations |
Do not discharge into biological
sewer treatment systems without prior approval. Specific concerns may be
high BOD load and foaming tendency. Dilution will reduce BOD and COD
factors proportionately. Low dosage flow rate or antifoaming agents
acceptable to the treatment plant may be helpful. Do not flush to
waterways. Disposal should be made in accordance with federal, state and
local regulations.
|
Section 14 - Transportation
Information |
Shipping Information
Proper Shipping Name: Fire
Extinguisher Charges or Compounds N.O.I., Class 60
National Motor Freight Code: 69160 Sub 0
Hazard Class: None
UN Number: None |
Section 14 - Regulatory
Information |
U.S. Federal Regulations
Toxic Substances Control Act (TSCA)
All components of this product are listed in the TSCA inventory.
Superfund Amendments and
Reauthorization Act of 1986 (SARA), Title III
Section 302/304
There are no components of this material with known CAS numbers which
are on the Extremely Hazardous Substances (EHS) list.
Section 311 & 312
Based on available information, this material contains the following
components which are classified as the following health and/or physical
hazards according to Section 311 & 312:
(2-Methoxymethylethoxy)Propanol 34590-94-8
Section 313
This material does not contain any chemical components which are subject
to Section 313 reporting requirements.
COMPREHENSIVE ENVIRONMENTAL
RESPONSE, COMPENSATION, AND LIABILITY ACT (CERCLA)
This material does not contain any chemical components which are subject
to the reporting requirements of CERCLA.
OTHER REGULATORY INFORMATION
None
STATE REGULATIONS
PENNSYLVANIA RIGHT-TO-KNOW
HAZARDOUS SUBSTANCES LIST
PA Hazardous Substances present at
levels greater than 1%:
(2-Methoxymethylethoxy)Propanol 34590-94-8 |
Section 15 - Other Information |
NFPA Rating
Health 1
Flammability 0
Reactivity 0 |
ADDITIONAL INFORMATION |
The information
contained herein is furnished without warranty either expressed or
implied. This data sheet is not a part of any contract of sale. The
information contained herein is believed to be correct or is obtained from
sources believed to be generally reliable. However, it is the
responsibility of the user of these materials to investigate, understand
and comply with federal, state and local guidelines and procedures for
safe handling and use of these materials. |
|